Subscribe icon Subscribe
Oregon OSHA icon Oregon OSHA

Oregon OSHA

Construction Depot

Safety and health newsletter for the Oregon construction industry

March 16, 2015


Oregon OSHA adopts changes to construction-industry fall protection rules

graphic of falling stick figure person

Oregon OSHA is lowering the construction industry’s current 10-foot general fall protection trigger height to six feet and prohibiting the use of slide guards as a sole or primary fall protection system. The changes, which affect only the requirements in Subdivision 3/M (Fall Protection) and Subdivision 3/E (Personal Protective and Life Saving Equipment), will take effect in 2017. The six-foot fall protection requirement will become effective Jan. 1, 2017, and slide guards will no longer be allowed as a primary fall-protection system starting Oct. 1, 2017.

Fall protection trigger height requirements covered under Subdivisions 3/L (Scaffolding), 3/R (Steel Erection), 3/S (Underground Construction), 3/CC (Cranes and Derricks in Construction); Division 2 (General Occupational Safety and Health Rules); Division 4 (Agriculture); and Division 7 (Forest Activities) are unaffected by these rule changes.

In October 2015, federal OSHA formally notified Oregon OSHA that the 10-foot fall protection requirement and the option to use slide guards as a primary fall-protection system were not as effective as federal OSHA’s requirements.

Oregon OSHA formed an advisory group of stakeholders in commercial and residential construction and asked for input in drafting changes to the existing rules over a series of meetings during the summer of 2015. The advisory group felt that the changes would primarily affect employers who build single-level homes and employers who work on roofs that have potential fall distances less than 10 feet above the ground. But lowering the fall-protection height to six feet would not have a significant fiscal impact on Oregon's construction industry as a whole.

Following those meetings, Oregon OSHA explained the changes to the public at five hearings held throughout the state in January.

You will find the text for the adopted changes on Oregon OSHA’s Adopted Rules webpage.

For more about the proposed changes, contact:
Tom Bozicevic, 503-947-7431,
Jeff Wilson, 503-947-7421,


In this issue

Comments or questions about the Construction Depot?

Reprinting, excerpting, or plagiarizing any part of this publication is fine with us!

But remember: the information in this newsletter is intended to highlight safe work practices, but it does not replace Oregon OSHA workplace safety and health rules.

For information about Oregon OSHA services and answers to technical questions, call (503) 378-3272 or toll-free within Oregon, (800) 922-2689.