Subscribe icon Subscribe
Oregon OSHA icon Oregon OSHA

Oregon OSHA

Construction Depot

Safety and health newsletter for the Oregon construction industry

July 14, 2015

Construction Q&A: Using compressed air cleaning for cleaning concrete forms

Q What are Oregon OSHA's requirements for using compressed air to clean out concrete forms? It appears that federal OSHA allows cleaning forms with more than 30 psi as long as there is a relief valve and chip protection. I'm not sure I understand what chip protection is either.

A The Oregon OSHA construction rule that you are referring to is 1926.302(b)(4) [Division 3, Subdivision I, Power operated hand tools]. This rule, which is the same as federal OSHA's, states:

"Compressed air shall not be used for cleaning purposes except where reduced to less than 30 psi and then only with effective chip guarding and personal protective equipment… The 30 psi requirement does not apply for concrete form, mill scale and similar cleaning purposes."

Effective chip guarding means any method or equipment that will prevent a chip or particle (of whatever size) from being blown into the eyes or skin of the operator or other workers. Effective chip guarding may be separate from the air nozzle or engineered into the design of the air nozzle. This can be done by setting up screens, walls, or barriers. You can also purchase nozzles with chip guarding "shielding" that will prevent chips from being directed towards others or being blown back toward the user such as in tight corners, or a combination of both.



In this issue:

Comments or questions about the Construction Depot? Contact Us

Reprinting, excerpting, or plagiarizing any part of this publication is fine with us!

But remember: the information in this newsletter is intended to highlight safe work practices, but it does not replace Oregon OSHA workplace safety and health rules.

For information about Oregon OSHA services and answers to technical questions, call (503) 378-3272 or toll-free within Oregon, (800) 922-2689.